Ecosense Pro
The new EcoPro controller has been approved by Major brands such as Mitsubishi, Daikin, Toshiba and Fujitsu etc and is universally compatible with any A/C that can be operated by a handheld remote.
The app is free to install and can control up to 500 individual air conditioners via either the app or pc program. Along with conventional occupancy-based control parameters, scheduling can also be used to switch the A/C On and Off, changing the mode or temperature settings, multiple times each day.
The Pro system is supplied with one D/W sensor, additional sensors can be added to the system, up to a maximum of eight sensors. The system also includes a wireless motion sensor that can be fitted anywhere in the room. The system also comprises of a special energy saving remote controller. Various settings can be put in place that will restrict access to the lower temperature ranges in cool mode and the higher temperature settings in heat mode. The EcoPro system ensures the A/C is operated in the most economical way possible, reducing energy consumption by a minimum of 30% and in most cases between 50% – 80%.
Product Highlights
Reduces energy costs by up to 80%.
EcoPro controller is universally compatible with all A/C’s controlled using a handheld remote.
The app provides complete remote access and control of the A/C, with real time display of room temperature and humidity
Occupancy control parameters currently in operation can be modified remotely via the app.
The app provides the facility to create multiple schedules to both start and stop the A/C.
Up to ninety days free of charge data logging. Plus, graphical displays of how efficiently your A/C is performing.
Discreet design
Can support up to eight wireless door/window sensors.
Includes 1 x door/window sensor, 1 x Pro PIR, 1x Eco Remote+.
Function Controls & Settings
STANDARD MODE
The air conditioning is controlled in accordance with movement being detected after a pre-set time delay. The time delay can be adjusted between 15-60 minutes. Therefore if the timer is set to 30 minutes and no movement is detected after 30 minutes, then the A/C will be switched off or *set back. For bedrooms etc. the controller has a built-in light sensor that detects when the room is in darkness. The controller can be set to allow the A/C to run for part or all the night.
OCCUPANCY MODE
With a wireless sensor fitted to the entry/exit doors of a room, using information from both the sensors and the controller, the logic will determine if a room is occupied regardless of movement being detected day or night. Using this method, the A/C can be controlled between 5 – 60 minutes after the room has been vacated.
DOOR – WINDOW SENSORS
A maximum of 8 sensors can be paired to the controller. Also, a single sensor can be paired to more than one controller. Also, a single sensor can be paired to more than one controller i.e., if there is more than one A/C in the same room. The sensors do not require to be in line of site of the controller and will communicate with the controller up to approximately 20 meters depending on the construction of the room in question. When a sensor is left open for more than three minutes the A/C will be terminated.
DIRECTIONAL PIR MOTION DETECTORS
The wireless sensor can be fitted anywhere in the room. Additional sensors can be added to the system to control areas not in direct line of sight with the controller.
SETBACK *
The Pro can be programmed in such a way that when the occupancy rules have been met, it will either switch the A/C off or set it back to a more economic setting i.e., 25 degree celsius cool mode at low fan speed. If a door or window sensor is open for more than three minutes the A/C will be terminated.
Have questions?
We’ve got Solutions
For urgent solutions, please contact us via phone at: +1268.721.2021
E. sales@ecosenseantigua.com
We look forward to assisting you.
Kindly provide your contact details
Have questions?
We’ve got Solutions
For urgent solutions, please contact us via phone at: +1268.721.2021
E. sales@ecosenseantigua.com